The wall pieces are mounted/assembled in 3 parts.
You will need a 13mm or 1/2” socket wrench.
The pink one is fully assembled and will need to be disassembled to get to the mounting bracket.
The black one has the bracket mounted into the seat tube, and will need to be removed from the seat tube.
There is a bracket that mounts to the wall (into a stud prefferably). I did not think to include the screws for mounting into the wall, sorry.
When the bracket is mounted to the wall, the wood part slides over the tube and onto the bracket. Please note the arrows on those pieces to denote which way is up.
Slide the seat/handlebar unit over the tube as far as it can go to sandwich the wood between the wall and the seat clamp.
Tighten the seat tube clamp with the socket, taking care not to scratch the painted wood surface.
Please let me know if you have any questions, or if there are any problems. Andy Gregg 906-361-2483 or bikefurniture@gmail.com
